Adaptor

Adaptor can convert digimatic signals into an RS-232C format, it serves as an interface between Digimatic Gages and Computers which enable advanced data analyses.

Features:

¡€Easy installation and operation
¡€Providing with software interface, convenient for second step development
¡€Light weight and small size

Communication specifications:

¡€Output signal level: RS232-C
¡€Transmission speed: 4800bps

                 Home position: DTE

Data format

1.Command: 0x31
Ack: D1 D2 D3 D4 D5 D6 D7 D8 D9 0x0D
Function: ASCII Data Out

2.Command: 0x30
ACK: 0x30
Function: Clear Output

3.Command: 0x41
Ack: StatusByte
Bit7: Reserved
Bit6: Reserved
Bit5: 1=Fast mode, 0=Normal mode
Bit4: 1=Caliper mode, 0=Sensor mode
Bit3: 1=Inch, 0=mm
Bit2: Reserved
Bit1: 1=Measuring unit is ready
Bit0: 1=New data in
Function: Status Out

Microprinter is an intelligent printer, specially designed for capacitive electronic digital calipers. It receives signals from a digital caliper, processes them and prints out the measuring data, statistical results and histograms. It's a desirable device for sampling inspection.

Features:

¡€Receive and output an upper limit(P) or ower limit(m) set by the user with the caliper.

¡€Receive and output every sampling datum Xi

¡€Judgement of ultralimit
When Xi>P,the indicator "¡ü"is outputted.
When Xi<P,the indicator "¡ý"is outputted.
When M<Xi<P,space sign is outputted.

¡€Statistical calculation
The following items are outputted through statistical calculation:
1).Number of measuring data N
2).Mean value X= Xi/N
3).Deviation S= (Xi-X)/N
4).Max. value Max=max£ûXi£ý
5).Min. value Min=min£ûXi£ý